HANDY PUMP Rotational Pumps

KIT Pump for Trailer with Hand Pump GH-HPI-25-S01AL W.G. and fittings.

KIT for Trailer with Hand Pump AL-HPI-12-S01AL, Cylinder, Hydraulic hoses and fittings.

KIT COMPOSED OF: No. 1 Hand pump in cast iron, series "GH-HPR-25-WHITE-GALVANIZED", 22.5 cc/stroke, double delivery, rod support with vertical and horizontal hole, with shut-off valve, galvanized body in WHITE color, for single-acting cylinders and MEDIUM aluminum-plastic reservoir of 3 liters with oil level indicator. No. 2 Fittings 3/8" G male for cylinder and hand pump. No. 1 Rod for hand pump. No. 1 Hose SAE 100 R2AT, EN 853, DIN 20022 2SN, 3/8" G, max. 100°C, max. 330 bar, 90° female 60° elbow fitting 3/8" G, straight female 60° fitting 3/8" G, length 2500 mm. No. 1 CYLINDER (JACK) “MAFX-SE-SS/PC”, diameter 95, hollow rod, intermediate pins, 03 stages 45/60/75, stroke 785 mm, max. working pressure 150 bar, 3 tons, 3/8" G port, pins Ø 35×40, hole Ø 26, oil volume 3.5 liters, galvanized body, chromed stages.

KIT COMPOSED OF: No. 1 Cast iron hand pump, series “GH-HPI-25-WHITE-GALVANIZED”, 22.5 cc/stroke, double delivery, rod support with vertical and horizontal hole, with inverter, galvanized body in WHITE color. Suitable for double-acting cylinders. MEDIUM aluminum-plastic reservoir, 3 liters, with oil level indicator. No. 2 3/8” G male fittings for hand pump No. 1 Hand pump rod No. 2 Hoses SAE 100 R2AT – EN 853 – DIN 20022 2SN, 3/8” G, max. 100°C, max. 330 bar, 90° curved female 60° fitting 3/8” G, straight female 60° fitting 3/8” G, length 1500 mm

KIT COMPOSED OF: No. 1 Light alloy hand pump, series “AL-HPM-FL-25-LV”, 25 cc/stroke, double delivery, release valve with lever, rod support with vertical and horizontal hole, 3/8” G male fittings. Suitable for single-acting cylinders. No. 2 3/8” G male fittings for hand pump No. 1 Hand pump rod No. 2 Hoses SAE 100 R2AT – EN 853 – DIN 20022 2SN, 3/8” G, max. 100°C, max. 330 bar, 90° curved female 60° fitting 3/8” G, straight female 60° fitting 3/8” G, length 1000 mm

KIT consisting of: - N°1 Wired mini power unit "UPW-RE-TRAILER" - "SPIDER-DL-OR" VERSION with NC-12V DL cartridge solenoid valve - 12V DC - 1800W motor with remote control switch and thermal protection - 1P2.5 cc pump - Check valve - Adjustable maximum pressure valve to REGULATE (Max 200 bar) - plastic tank 8 lt. (SQUARE 170x170) Neutral color - Spider KIT type DL with M12 4-pole connector - UP-DOWN pushbutton + KEY with 5 m smooth cable - Horizontal mounting "OR". - N ° 1 SAE 100 R2AT - EN 853 - DIN 20022 2SN 3/8 "G - Max. 100 ° C - Max. 330bar - Female 90 ° elbow 3/8" G - Female straight fitting 60 3/8 "G - L = 2200mm.

KIT COMPOSED OF: No. 1 Wired mini power pack “UPW-RE-TRAILER” – “SPIDER-DL-OR” version, with NC cartridge solenoid valve 12V DL, 12V DC motor – 1800 W with contactor and thermal protection, pump 1P 2.5 cc, check valve, adjustable pressure relief valve to be set (max. 200 bar), offset plastic reservoir 8 liters (SQUARE 170x170), neutral color. Spider kit type DL with M12 4-pin connector, UP-DOWN + KEY control pendant with 5 m smooth cable, horizontal mounting “OR”. No. 2 3/8” G fittings for cylinder and mini power pack No. 1 Hose SAE 100 R2AT – EN 853 – DIN 20022 2SN, 3/8” G, max. 100°C, max. 330 bar, 90° curved female 60° fitting 3/8” G, straight female 60° fitting 3/8” G, length 2200 mm No. 1 JACK “MASQ-SE-SS/PC”, galvanized – Ø110, articulated rod / intermediate pins, 4-stage telescopic 45/60/75/90, stroke 1150 mm, max. working pressure 200 bar, 5 tons, 3/8” G female port, pins Ø40x40 for SADDLE 03 (Ø127), square boot 100x100, joint Ø45, oil volume 5.3 liters, galvanized body, chromed stages

KIT COMPOSED OF: No. 1 Wired mini power pack “UPW-RE-TRAILER” – “SPIDER-DL-OR” version, with NC cartridge solenoid valve 12V DL, 12V DC motor – 1800 W with contactor and thermal protection, pump 1P 2.5 cc, check valve, adjustable pressure relief valve to be set (max. 200 bar), offset plastic reservoir 12 liters (SQUARE 170x170), neutral color. Spider kit type DL with M12 4-pin connector, UP-DOWN + KEY control pendant with 5 m smooth cable, horizontal mounting “OR”. No. 2 3/8” G fittings for cylinder and mini power pack No. 1 Hose SAE 100 R2AT – EN 853 – DIN 20022 2SN, 3/8” G, max. 100°C, max. 330 bar, 90° curved female 60° fitting 3/8” G, straight female 60° fitting 3/8” G, length 2200 mm No. 1 JACK “MASQ-SE-SS/PC”, galvanized – Ø125, articulated rod / intermediate pins, 5-stage telescopic 45/60/75/90/105, stroke 1438 mm, max. working pressure 200 bar, 5 tons, 3/8” G female port, pins Ø40x40 for SADDLE 03 (Ø127), square boot 100x100, joint Ø45, oil volume 9.5 liters, galvanized body, chromed stages

Pompa a mano in lega leggera serie "AL-HPM-PD-45" da 40 cc/ciclo, doppia mandata, con leva universale (per asta tonda o rettangolare, rubinetto di scarico con leva. Per cilindri a semplice effetto. Fissaggio 4 fori D=9mm I=60x87mm. Su attacco aspirazione tubo R1AT da 3/8"G L=1300mm e filtro aspirazione d=46mm 90micron. Su mandata esclusore + manometro 0-60bar, minipresa e tubo R1AT da 3/8"G L=1300mm con attacco femmina 3/8"G.

Pompa a mano in ghisa da 20 cc/ciclo con valvola di massima a taratura fissa 30bar. WHITE-GALVANIZED - Modulo con tre uscite con valvola di ritegno montato sulla pompa.

KIT Composto da: - N°1 Pompa ad ingranaggi ISO 4 FORI corpo in ghisa - Gruppo 3 - Cilindrata 60cc/rev - REVERSIBILE - Max 270 bar continui - 310 bar di picco - Velocità min. 500 rpm - max. 1800 rpm - Attacchi 1"1/4. - N°1 MOTORE ad ingranaggi GR3 - Rotazione REVERSIBILE - Drenaggio ESTERNO - Portata 36 cc/rev. - Pressione massima 200 bar - V.max 2300 rpm - V.min 650 rpm - Corpo centrale in alluminio - Fondello e Flangia in GHISA fori attacco D=11mm - Int.=128,1x98,4 - Diametro centraggio D=50,8mm. Albero D=21,15 conico 1:8 - Linguetta disco Sp.4mm - Attacchi laterali INLET foro D=27mm - Interasse I=51 viti M10 - OUTLET foro D=27mm - Interasse I=51 viti M10. - N°1 Valvola "VMD-120" massima pressione 3/4"G - P.max 200 - Portata 90 lpm - Attacco Manometro - Campo taratura 10-180 bar - Taratura standard 90 bar - Incremento 30 bar/giro-vite - N°2 RACCORDO-FLANGIA SERIE "RG" PER POMPA - 3 VITI - INTERASSE 51 - ATTACCO 3/4"G - Completo di viti e guarnizione OR. - N°1 Manicotto scanalato 40x36 Z=20 pompa gruppo 3 con albero conico D=18,7 Con. 1:8 - Linguetta a disco Sp=4 - N°1 Portatubo Maschio Bassa Pressione

KIT Pompa a mano "GH-HPS-25" da 22,5 cc/ciclo, con serbatoio in lamiera da 2 lt.con livello olio - Distributore monoblocco 1 Sezione 3/8"G CURSORE tipo "A" , Portata 40 lt/min , 1 Leva 1-0-2 instabili con ritorno al centro , Valvola di Massima Pressione tarabile , Pressione massima 250 bar

Pompa a mano in lega leggera serie "AL-HPR-25-VS-ANODIZZATA" da 24,5 cc/ciclo, doppia mandata, con valvola di ritegno incorporata, valvola di massima tarata a 100 bar, rubinetto di scarico, attacco posteiore 3/8"G (x handy pump) - per cilindri a semplice effetto. Collegamento con Distributore monoblocco a 2 Sezioni 3/8"G "MNB-040-1L-A1" - CENTRO APERTO - CONNESSIONE in PARALLELO e CURSORE tipo "A" - Portata 40 lt/min - 2 Leve 1-0-2 instabili con ritorno al centro - Valvola di Massima Pressione tarabile - Pressione massima 250 bar. Serbatoio in lamiera da 10 lt con livello olio.

HAND PUMP AL-HPS-25 with TANK 5 lt. and Manifold, Distributors, pipe and fittings for ship.

KIT for Boat with HAND PUMP AL-HPS-25 with TANK 5 lt. and Manifold, Distributors, pipe and fittings.